Randy Malagueño—Head of Department, Extrusion Blow Molding

Electrical Engineering graduate from Bicol University in the Philippines.  Former Maintenance Supervisor at FCC Corporation of Japan, and Production Engineer for Blow Molding & Injection Molding at Lotus Packaging Corporation, Philippines.

E-mail: randy.m@hipf.edu.sa

Edwin Francisco—Senior Instructor, Extrusion Blow Molding

Electrical Engineering graduate from Cebu Institute of Technology in the Philippines.  Former Injection and Blow Molding Technician at San Miguel Packaging Specialist, Inc.

E-mail: edwin.f@hipf.edu.sa

William Iligan—Senior Instructor, Extrusion Blow Molding

Mechanical Engineering graduate from University of Cebu in the Philippines.  Former Stretch Blow Molding Technician at San Miguel Packaging Specialist, Inc.

E-mail: william.tura@hipf.edu.sa

Kiki Hakiki—Senior Instructor, Extrusion Blow Molding

Mechanical Engineering graduate from Poltek ITB in Indonesia. Former Senior Chief Engineer at PT Danone Dairy Indonesia.

E-mail: k.hakiki@hipf.edu.sa

Jovit Montemayor—Senior Instructor, Extrusion Blow Molding

Mechanical Engineering graduate from Batangas State University in the Philippines.  Former Senior Supervisor at Seychelles Marketing Board in Seychelles Islands, and Technical & Production Supervisor at ALPET Inc., Philippines.

E-mail: jovit5610@hipf.edu.sa

Denesse Valencia—Senior Instructor, Extrusion Blow Molding

Mechanical Engineering graduate from Technological University of the Philippines.  Former Production Engineer at Japan Aviation Electronics Philippines, and Mold Design Engineer Manly Plastic, Inc., Philippines.

E-mail: densio.v@hipf.edu.sa

Sultan Theyeb Al-Mutairi—Junior Instructor, Extrusion Blow Molding

Mechanical Technology graduate from Riyadh Technical College.  Former Machine Operator at Al-Rajhi Plastics Company.

E-mail: sultan.m@hipf.edu.sa

Isao Nagaya—Japanese Plastics Expert, Extrusion Blow Molding

Bachelor of Applied Physics from Hokkaido University, Japan.  Former Manager of Polystyrene, ABS Division at Mitsubishi Chemicals Corporation; Manager at Monsanto Chemicals Company, U.S.A.; Vice President at Monsanto / Premierl / Kasei Company in Thailand; Automotive Manager at Monsanto Chemicals Company, U.S.A.; General Manager for Biopolymer at Mitsubishi Chemical Corporation.

E-mail: i.nagaya@hipf.edu.sa